I’ve decided to go right back to basics and revisit one of the very first background techniques I ever tried! Elastic Band Brayering!

This is a background that everyone can do because everyone has elastic bands in their house, if you don’t; chances are the local postman has dropped some in the street recently (that’s how I got mine!)

Supplies:

  • Thick Elastic Bands
  • Brayer – with removable roller (Woodware or Ranger)
  • White Card Stock
  • Versamark or Embossing Inkpad
  • Embossing Powder – Metallic, Clear or White
  • Newspaper
  • Adirondak Colorwash Sprays – any colour (I use them all!)
  • Sponge
  • Kitchen Towelling

Instructions:

  1. Remove roller from brayer, take 2 rubber bands, wrap and twist around the roller, spread them out to cover the entire width, re-assemble brayer back together again.
  1. Place white card onto newspaper, ink brayer with versamark inkpad, randomly roll across the surface of the card. Repeat this step, each time rolling in a different direction. Don’t worry about overlapping as you want to be completely random, continue until you have completely rolled the entire card surface.
  1. Pour embossing powder over the pattern and heat set. White or clear creates a more traditional faux batik effect. I used gold on some backgrounds, on others I used a white pearl as I wanted a shimmer effect.
  1. Once cooled; take 1 colourwash spray and lightly mist over the surface of the card, use a sponge to spread the colour across the card and remove all traces of the white card base colour.
  1. Next take 2-3 different colours of colourwash sprays: stream, wild plum and butterscotch work well together, as do raisin, eggplant and terracotta. Squirt 3-4 times with each colour randomly over the card, you want to have little bursts of colours. Don’t worry about the colours overlapping as they will blend together nicely.
  1. Heat set inks, once dry take a kitchen towel sheet and rub across the surface of the embossed pattern to remove some of the ink, you can control how much ink you remove with pressure. If you want to completely remove the ink from the embossed areas to create a faux batik effect you can use a moist baby wipe to lift the ink. Your background is complete.

Textured Variation:

This is an interesting variation of this background which creates a lovely texture.

Follow the directions above from Steps 1 – 3. Once the embossing has cooled; crumple the card into a tight ball, twisting and turning  the paper to create lots of creases, don’t worry if some of the embossing flakes off or if by twisting it you break the embossed areas; this is normal. Flatten out the card again, and then apply the inks following the main directions from step 4 onwards above.

This variation will not only create a brayered band resist, but the inks will seep into all the creases and folds in the card and breaks in the embossing to create a more textured background.

Background Samples:


Brayed Bands Cards:

Advertisements